Self Cleaning Filter

Product specification

Self cleaning filters can be used as side filter to protect cooling towers or pumps, heat exchanger, boiler and ect.,
Also Self cleaning filter with 100-300 micron mesh size ( according to UF requirements) is applicable before Ultrafiltration. And 50 micron mesh size can be apply as a RO membranes pretreatment unit.
Filtration is continuous and there is no need to side filter during washing operation. Due to Bernoulli principal during washing, there is a minimum water waste ( 99% efficiency)
Washing mechanism are as follows:


1- During normal filtration, dirt particles accumulate from top to bottom on the inside of the filter insert according to fluid mechanical laws, when the set time or differential pressure reached the particle drainage valve will open

اولترا فیلتر

1- In second phase a after the valve opens the flushing disc moves into the filter sieve without touching it. The outer diameter of the disc is smaller than the inner diameter of the sieve.The flow velocity increases within the gap between flushing disc and strainer. This causes a decrease of pressure between them. Dirt particles are sucked out of the filter element

Model F450 :

• Capacity 2-5000 mch
• Mesh size:150 micron t0 50 mm
• Operation pressure 1-25 bar
• For more information, please refer to catalog and data sheet

Model F480:

• Capacity: 220-45000 mch
• Mesh size: 40 micron- 50mm
• For more information, please refer to catalog and data sheet


Model F480 as a cooling water filter
Capacity:12500 mch
Mesh size: 1000 micron
Operation pressure: 5.4 bar